深圳市利盛达科技有限公司 利盛达科技让电源设计更便捷可靠|联系电话:13928434054
请输入料号

当前位置: 首页>产品中心 >按类型分 >电子开关 > RT9702PB

RT9702PB,80mΩ,500mA/1.1A 电源开关

RT9702PB】80mΩ,500mA/1.1A 电源开关

  • 将RT9702PB添加至收藏夹 用邮件咨询RT9702PB的相关信息 就RT9702PB QQ咨询,也可电话至139 2843 4054。

  • 感谢您访问利盛达官网!
    如有任何问题,请联系新市场拓展部24小时服务热线:139 2843 4054;
    sales@lsdtek.com;
RT9702PB 详细介绍
相关商品: RT9701 RT9701PB RT9702A TPW5201 TPW5202 TPW5203

RT9702PB General Description

RT9702PB/A是低成本单N-MOSFET上壁电源开关 , 适用于自给电及汇流排给电之USB装置 , RT9702PB系列备有charge pump电力以驱动内部MOSFET开关 , 此开关低Rdson 80mΩ符合USB压降规格 , 侦错旗标输出提供USB控制器使用 , 另外还有涌浪电流缓起动 , 过热保护 , 避免开关在重载下损坏 , 过低压保护确保开关能在正常电压下工作 , 极低的25uA静态电流非常适用于以电池为主之移动式产品。
The RT9702PB and RT9702A are cost-effective, low voltage, single N-Channel MOSFET high-side power switches, optimized for self-powered and bus- powered Universal Serial Bus (USB) applications. The RT9702PB/A equipped with a charge pump circuitry to drive the internal MOSFET switch; the switch's low RDS(ON), 80mΩ, meets USB voltage drop requirements; and a flag output is available to indicate fault conditions to the local USB controller.
Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, fault current is limited to typically 800mA for RT9702PB in single port and 1.5A for RT9702PBA in dual ports in accordance with the USB power requirements, lower quiescent current as 25μA making this device ideal for portable battery-operated equipment.
The RT9702PB/A is available in SOT-23-5 and TSOT-23-5 packages requiring minimum board space and smallest components.

RT9702PB Ordering Info
RT9702

Note :
Richtek Pb-free and Green products are :
► RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020.
► Suitable for use in SnPb or Pb-free soldering processes.

RT9702PB Features
RT9702PB 产品规格:
2V ~ 5.5V 输入电压范围
500mA/1.1A 最大电流输出
25uA静态电流
支持热插拔
UL认证许可 E219878
TUV认证许可 IEC60950-1 : 2005
RoHS认证许可

RT9702PB 产品特性:
• 兼容于USB规格
• 低Rdson 80mΩ
• 过电流保护
• 1.7V输入过低电压保护
• 过热保护机制
• SOT23-5及TSOT23-5小包装
• 逆向电流制止功能

• Compliant to USB Specifications
• Built-In (Typically 80mΩ) N-Channel MOSFET
• Output Can Be Forced Higher Than Input (Off-State)
• Low Supply Current :
  ♦ 25μA Typical at Switch On State
  ♦ 1μA Typical at Switch Off State
• Guaranteed 500mA/RT9702PB and 1.1A/RT9702PBA Continuous Load Current
• Wide Input Voltage Ranges : 2V to 5.5V
• Open-Drain Fault Flag Output
• Hot Plug-In Application (Soft-Start)
• 1.7V Typical Under Voltage Lockout (UVLO)
• Current Limiting Protection
• Thermal Shutdown Protection
• Reverse Current Flow Blocking (no body diode)
• Smallest SOT-23-5 and TSOT-23-5 Packages Minimizes Board Space
• UL Approved-E219878
• TUV IEC60950-1 : 2005 Certified
• RoHS Compliant and 100% Lead (Pb)-Free
RT9702PB Application
• USB汇流排/自给电集线器
• USB外围产品运用
• ACPI电源分配
• 热插拔电源供应系统
• 笔记本电脑及主板
• 电池式产品
• 充电器运用

• USB Bus/Self Powered Hubs
• USB Peripherals
• ACPI Power Distribution
• PC Card Hot Swap
• Notebook, Motherboard PCs
• Battery-Powered Equipment
• Hot-Plug Power Supplies
• Battery-Charger Circuits
RT9702PB Pin Configurations

(TOP VIEW)
SOT-23-5/TSOT-23-5

RT9702PB Typical Applications Circuit

Note: A low-ESR 150μF aluminum electrolytic or tantalum between VOUT and GND is strongly recommended to meet the330mV maximum droop requirement in the hub VBUS. (see Application Information Section for further details)


相关文章:
电子开关(TPW5201~3)实现过流保护原理